What is WalkingParticles
Walking particles is a PocketMine-MP Plugin that let’s you to create particles to follow you, it has a massive amount of particles, but i’ll list them all later.
What are the Permissions?
walkingparticles
walkingparticles.sign.toggle
walkingparticles.sign.create
walkingparticles.sign.destroy
walkingparticles.try.pay.bypass
walkingparticles.command
walkingparticles.command.admin
walkingparticles.command.wplist
walkingparticles.command.wpget
walkingparticles.command.wppack
walkingparticles.command.wptry
What are the commands?
Commands
-/walkp get <player>
Gets the list of particles of what a player is using.
-/walkp list
Gives you the list of available particles that you can use.
-/walkp clear <player>
Clears all the particles from a specific player.
-/walkp add <particle> <player>
Adds a specific particle on a specific player.
-/walkp remove <particle> <player>
Removes a particle on a player.
-/walkp amplifier <particle> <player>
Adds the amplifiers of the particle.
-/walkp defaultparticle <particle>
Sets the defaultparticle for normal users.
-/walkp defaultamplifier <amplifier>
Sets the defaultamplifier for normal users.
-/walkp help
Shows the help page.
-/walkp display line|group <player>
Sets if you want to display your particles as a line or a group.
-/walkp randomshow <player>
Randomly shows a player?
-/walkp pack <use|create|delete|addp|rmp|get|list> <args…>
Let’s you to use/create/delete/addparticle/removeparticle/get/list Packs.
-/walkp try <player>
Tries a particle that a player is using for 10 seconds.
-/walkp use <player>
Uses a particles of a player.
-/walkp set <particle> <player>
Sets a particle from a player.
-/walkp itemshow <player>
Shows an item to a player.
-/walkp signhelp <args…> *
Sign help commands.
-/walkp version
Shows the current version of the WalkingParticles plugin.
-/walkp on
Enables your Walking Particles.
-/walkp off
Disables your Walking Particles.
-/walkp reload
Reloads the plugin, this command is quite useless since LEET doesn’t allow config changes.
-/wppack <apply|get|list> <args…>
Applies/Gets/Lists the current WalkingParticles Packs.
ALIASES
-/wptry <player>
-/wpget
-/wplist
-/wprand
-/wpitem
How to add particles on signs?
On a sign, the first line must be [WParticles] there is also an alias called [Walkp]
then the second line is the particle name
EXAMPLE
[WParticles]
add
water
How to remove a specific particle on a sign?
You can remove a particle on a sign by using a sign and using this format
[WParticles]
remove
<particle>
How to clear all particles from a sign?
–
Use a sign and use this format
[WParticles]
clear
Particles
“bubble”, “explode”, “splash”, “water”, “critical”, “spell”, “smoke”, “driplava”, “dripwater”, “spore”, “portal”, “flame”, “entityflame”, “lava”, “reddust”, “snowball”, “heart”, “ink”, “hugeexplode”, “largeexplode”, “instantspell”, “slime”, “enchantment”, “happyvillager”, “angryvillager”, “droplet”, “colorful”, “item_{id}”, “block_{id}”, “desblock_{id}”
Note!
Walking particles is a PocketMine-MP Plugin that let’s you to create particles to follow you, it has a massive amount of particles, but i’ll list them all later.
What are the Permissions?
walkingparticles
walkingparticles.sign.toggle
walkingparticles.sign.create
walkingparticles.sign.destroy
walkingparticles.try.pay.bypass
walkingparticles.command
walkingparticles.command.admin
walkingparticles.command.wplist
walkingparticles.command.wpget
walkingparticles.command.wppack
walkingparticles.command.wptry
What are the commands?
Commands
-/walkp get <player>
Gets the list of particles of what a player is using.
-/walkp list
Gives you the list of available particles that you can use.
-/walkp clear <player>
Clears all the particles from a specific player.
-/walkp add <particle> <player>
Adds a specific particle on a specific player.
-/walkp remove <particle> <player>
Removes a particle on a player.
-/walkp amplifier <particle> <player>
Adds the amplifiers of the particle.
-/walkp defaultparticle <particle>
Sets the defaultparticle for normal users.
-/walkp defaultamplifier <amplifier>
Sets the defaultamplifier for normal users.
-/walkp help
Shows the help page.
-/walkp display line|group <player>
Sets if you want to display your particles as a line or a group.
-/walkp randomshow <player>
Randomly shows a player?
-/walkp pack <use|create|delete|addp|rmp|get|list> <args…>
Let’s you to use/create/delete/addparticle/removeparticle/get/list Packs.
-/walkp try <player>
Tries a particle that a player is using for 10 seconds.
-/walkp use <player>
Uses a particles of a player.
-/walkp set <particle> <player>
Sets a particle from a player.
-/walkp itemshow <player>
Shows an item to a player.
-/walkp signhelp <args…> *
Sign help commands.
-/walkp version
Shows the current version of the WalkingParticles plugin.
-/walkp on
Enables your Walking Particles.
-/walkp off
Disables your Walking Particles.
-/walkp reload
Reloads the plugin, this command is quite useless since LEET doesn’t allow config changes.
-/wppack <apply|get|list> <args…>
Applies/Gets/Lists the current WalkingParticles Packs.
ALIASES
-/wptry <player>
-/wpget
-/wplist
-/wprand
-/wpitem
How to add particles on signs?
On a sign, the first line must be [WParticles] there is also an alias called [Walkp]
then the second line is the particle name
EXAMPLE
[WParticles]
add
water
How to remove a specific particle on a sign?
You can remove a particle on a sign by using a sign and using this format
[WParticles]
remove
<particle>
How to clear all particles from a sign?
–
Use a sign and use this format
[WParticles]
clear
Particles
“bubble”, “explode”, “splash”, “water”, “critical”, “spell”, “smoke”, “driplava”, “dripwater”, “spore”, “portal”, “flame”, “entityflame”, “lava”, “reddust”, “snowball”, “heart”, “ink”, “hugeexplode”, “largeexplode”, “instantspell”, “slime”, “enchantment”, “happyvillager”, “angryvillager”, “droplet”, “colorful”, “item_{id}”, “block_{id}”, “desblock_{id}”
Note!
- If you are using a laggy device, do not use large particles, it can possibly lagg your device.